The SpectrAlert Advance LENS-BC is blue lens used for any indoor or outdoor ceiling mount strobes.
The System Sensor BEAM1224 is transmitter / receiver unit and a reflector as fourwire conventional projected beam smoke detectors.
The SpectrAlert Advance SRK-P is an unmarked, red, wall-mount outdoor strobe with selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd.
The NOTIFIER ISO-X Fault Isolator Module is used with the NFS-3030, AM2020, AFP1010, NFS-640, AFP-400, AFP-300, AFP-200, AFP-100 and System 5000 (equipped with an AIM-200 module) to protect the system against wire-to-wire short circuits on the SLC loops.
The 5151 thermal detector meets the needs for applications where rapid response is vital and rapid temperature increases would only be caused by a fire emergency.
L-Series, blue lens, used for any indoor ceiling-mountable strobes.
Photoelectronic Low-Profile Plug-In Detector for Special Applications Note: For pendent mount applications where remote testing is NOT needed, the 2151 needs to be used with either the B114LP or B114LPBT base.
L-Series, white, ceiling-mountable, clear lens, chime strobe that is unmarked. Selectable strobe settings: 15, 30, 75, 95, 115, 150, and 177 cd.